How to Replace Pressure Cooker Gaskets and Handles

Quick Answer

Replace your pressure cooker gasket by removing the old clip-on seal and snapping the new TTK gasket 22cm into place. For handles, unscrew the damaged part and attach the replacement using the same screws.

Step-by-Step Replacement Guide

1. 1. Remove the Old Gasket: Ensure the cooker is cool and unplugged. Pull the old gasket out of the lid groove starting from one side. If it sticks, use a blunt tool like a spoon handle to gently pry it loose. Common mistake: using a sharp knife can damage the lid groove. Stick to non-metal tools.
2. 2. Install the New TTK Gasket: Align the new TTK gasket 22cm with the lid groove. Press it in evenly around the circumference until it snaps into place. Check that it sits flush without any gaps. If the gasket feels too tight, soak it in warm water for 5 minutes to soften the rubber before installation.
3. 3. Remove the Damaged Handle: Turn the pressure cooker lid upside down. Unscrew the screws holding the top handle or helper handle. Keep the screws in a safe place—you will reuse them with the new handle. Some handles have hidden screws under a plastic cap. Pry the cap off gently with a flathead screwdriver.
4. 4. Attach the New Handle: Place the new handle on the lid, aligning the screw holes. Insert the original screws and tighten them by hand first, then use a screwdriver to secure them firmly. Do not overtighten—it can crack the plastic. Check that the handle does not wobble. If it moves, remove it and check if the screw holes are stripped; you may need a slightly larger screw.
5. 5. Test the Seal and Handle: Close the lid and lock it. Fill the cooker with water and bring it to pressure. Listen for hissing sounds—a sign of a poor seal. Also, lift the cooker by the new handle to confirm it is secure. If you hear hissing, turn off the heat, release pressure, and reseat the gasket. Repeat the test before cooking food.

Spare Parts You May Need

• TTK Pressure Cooker Clip on Gasket 22cm: The TTK Pressure Cooker Clip on Gasket 22cm is a replacement spare part designed for Prestige pressure cookers. It is compatible with models 47288 and 47289. Ensures a proper seal for efficient cooking and prevents steam from escaping during use.

  

• New Pressure Cooker Top Handle: This New Pressure Cooker Top Handle is a spare part for Prestige model 47289. It replaces the original top handle to ensure a proper fit and continued functionality. A cracked handle can make the lid hard to open; replacing it restores safe operation.

  

• Pressure Cooker Helper Handle: The Pressure Cooker Helper Handle is a top handle for select Prestige models including 57050, 57051, 55159, 46770, and 46414. It offers a convenient grip for lifting and carrying. Makes lifting the hot cooker safer and more comfortable, especially for larger models.